Home – Poseidon Roofing & Seamless Waterproofing
407-512-8479

Stop Losing Money On Your Current Roofing & Waterproofing Solution

Get More Projects Completed In Half The Time Without Losing Money on Labor & Warranty Costs

  • check
    Easy-To-Use, Cold Fluid, Spray-Applied Seamless Membrane
  • check
    A 3-Man Crew Can Easily Apply 12,000 sf per Day
  • check
    Virtually Eliminates Warranty Related Call-Backs
  • check
    Use 1 System for ALL Roofing, Waterproofing & Air/Vapor Barrier Applications
  • check
    Seal Stucco Cracks, Roofs or ANY Vertical or Horizontal Substrate

Learn More About Profitable Roofing & Waterproofing - Call Now To
Get A FREE Consultation

 407-512-8479

Used by:

Is Your Current Roofing & Waterproofing System Labor-Intensive?

No more lifting or craning all your materials to the roof - With WetSuit® you can leave them all on the ground to save costs

Conventional roofing and waterproofing solutions require too much labor. They can often put you behind schedule, cause unstable budgets, create cost over-runs and frequent call backs on work.

It’s frustrating. Warranty costs resulting from premature failure can lead to construction liabilities leaving you exposed to potential litigation. And, let’s face it most general contractors, subcontractors and property owners can show you little to no empathy for delays, quality issues, unforeseen problems, or cost over-runs.

It falls on you. And it’s not even your fault. After all, you’ve completed the job perfectly and satisfied all the requirements.

BUT HERE'S THE FACT:

All Conventional Roofing & Waterproofing Systems With Seams Will Eventually FAIL!

All other solutions are applied by adhering one layer to another, and something as simple as 1" of seam failure may result in catastrophic damage to interior property and contents.

That’s why we offer the only Cold-Fluid, Spray-Applied, Seamless Roofing & Waterproofing Solution that goes on in half the time, requires only 3 workers and is guaranteed for 20 years.

Introducing: WetSuit® Seamless Membrane System 

Environmentally friendly system used throughout the entire building envelope that meets specific roofing, waterproofing and air/vapor barrier requirements.

Manufactured by Neptune Coatings and exclusively distributed by Poseidon Sales, the complete WetSuit® System includes:

  • check
    WetSuit® 2 Part Instant Set Membrane
  • check
    WetSuit® 1 Part Self-Leveling Membrane
  • check
    WetSuit® Undercover Pre-Strip Joints, Penetration, Details
  • check
    WetSuit® Trowel and Fiberated Trowel for Patching Details
  • check
    Invisilink™ Reinforcing Fabric
  • check
    WetSuit® PrimeMate Water Based Primer

It’s Like Having A Magic Solution In A Bucket That Pays YOU Every Time You Use It

Fluid Applied Seamless Membrane System
Seamless Possibilities

WetSuit® Can Be Mixed In Any Color So You Can Perfectly Match Your Client's Property Anywhere WetSuit® Is Used

The WetSuit® Roofing & Waterproofing System Has
Everything You Need To Easily Grow Your Business

  • check
    Easy-To-Use, Quick, Applies In Half The Time
  • check
    Eliminate Delays and Cost Over-Runs
  • check
    Keep Every Project On Schedule
  • check
    Reliable Way To Increase Profitability
  • check
    Enables You To Take on More Projects In Less Time
  • check
    Reduces Demand For Highly Skilled Labor
  • check
    Applicator Certified Training Equals Quality Control
  • check
    Reduce Warranty Costs and Call Backs on Work
  • check
    Non-Peeling, Non-Cracking and Self-Extinguishing
  • check
    Water-Tight, Simulated Sand Stucco Finish
  • check
    2000 % Elongation and 0 % Degradation after 5,000 Accelerated Test Hours

The WetSuit® System is a cold-fluid applied, seamless membrane that is  water-based, has no VOC’s, is Class A fire rated, and has self-extinguishing capabilities.

And, it can be applied in half the time of conventional seam-based solutions. A crew of only 3 can easily apply 12,000 sq ft per day and is fully guaranteed for 20 years.

FM testing proved to put WetSuit® in a class of its own. It is one of a select few materials on the market with a Class A fire rating, severe hail resistance, 2124% elongation and a wind uplift of Class 1-990.

It can be sprayed to any mil thickness in a single pass thus creating a truly custom and precise membrane allowing unparalleled architectural freedom and ease of application.

WetSuit® 2-Part

The WetSuit® liquid membrane is a fully self-adhered, cold spray applied, self-flashing membrane with a wide variety of uses for virtually all above and below grade applications.

The water-based, no VOC, low pressure, cold spray applied, non-flammable features of WetSuit® eliminate job hazards such as torches, solvents, and heavy equipment.

Because WetSuit® is so lightweight and with excellent adhesion to most roof surfaces, the need to tear off existing roof systems is most often eliminated, greatly reducing installation costs and environmental impact.

Surface preparation is generally limited to pressure washing the old roof to provide a clean surface for WetSuit® to adhere to. WetSuit® can be installed at a fast and efficient rate of 1500 sq ft per hour with limited manpower and increased production.

In addition, WetSuit® is proven as a viable air and vapor barrier. With very low perms, The WetSuit® can be employed not only in below grade applications and roofing, but in between as a seamless, fluid applied vapor barrier as well.

WetSuit® 1-Part

WetSuit® 1 Part is a water-based, medium viscosity, self-leveling membrane that can be sprayed, brushed, or roll applied up to 80 mils wet vertically. Wetsuit® 1 Part is used in roofing, waterproofing and air/vapor barrier applications.

For roofing, Wetsuit® 1 Part is ideal for standing seam metal, aged SPF, wood and concrete. Our reinforcement fabric, Invisilink®, is frequently embedded into Wetsuit® 1 Part during the preparatory phase by application to existing seams and joints, or to create a fully reinforced membrane.

Wetsuit® 1 Part is primarily used as a stand-alone membrane or as counter-flashing to Wetsuit® 2 Parts.

WetSuit® Undercover

The WetSuit® UnderCover is a water-based, medium viscosity, self-leveling membrane that can be sprayed, brushed, or roll applied up to 80 mils wet vertically. UnderCover is used exclusively under, or between, the Wetsuit® products.

Wetsuit® UnderCover exhibits a tenacious adhesion to most substrates and is primarily used as detail product in conjunction with Invisilink™ fabric to detail penetrations, pre-strip in joints, edging, or cant strips, or self-level areas prior to WetSuit® 2- Part application.

WetSuit® Trowel

WetSuit® Trowel is a high viscosity, water-based flashing formula designed as a roofing and waterproofing patch. Applied by trowel or brush, it is ideal for sealing leaky roof penetrations, ducting, flashings, cracks, joints and tears.

WetSuit® Trowel is ideal on EPDM, TPO, Modified Bitumen, asphalt, wood, metal, concrete and foam. Additionally, WetSuit® Trowel can be used as a waterproofing adhesive for setting tile and stone and is a very efficient product for preparation to fill cracks, voids and as a boot for small penetrations.

WetSuit® Fiberated Trowel

WetSuit® Trowel has been reinforced with fiberglass strands which cures into a high tensile strength, minimum elongation roofing and waterproofing patch. Trowel, brush, or hand applied, it works perfectly for detailing high movement areas such as penetrations and joints.

Wetsuit® PrimeMate is designed as a primer for various single-ply membranes including PVC, Hypalon and Aged TPO.

WetSuit® PrimeMate

Wetsuit® PrimeMate is a high quality, plasticizer free, single component, water-based, acrylic primer for spray brush or roller application. It is designed to provide both excellent adhesion as well as plasticizer migration resistance. It is formulated to block plasticizer migration from PVC membranes that can cause unsightly discoloration and premature failure of elastomeric coating systems.

It has excellent adhesion to most single ply surfaces including PVC, Hypalon and aged TPO. It Provides excellent surface for subsequent application of acrylic and 100% solids Silicone coatings.

Invisilink™ is a lightweight, yet super durable, tear resistant seam fabric. Invisilink™ features stitch bonded polyester which is one of the strongest materials available to the roofing industry for use as reinforcement in cold process roofing.

Invisilink’s™ characteristics provide an unusual combination of high strength properties with good elongation for excellent thermal stress force accommodations. The soft polyesters will readily conform to various roof surfaces such as embedded gravel and standing seam metal roof decks.

It is also much easier to handle and apply properly than other soft polyester sheets. Invisilink™ is used with WetSuit® 1 Part, WetSuit® Trowel or WetSuit® Undercover on new construction with seams, and gaps more than 1/4” wide. It can be applied by brush or roller.

Invisilink™ is available in the following sizes:

  • check
    4" x 300'
  • check
    6" x 300'
  • check
    40" x 324'

Invisilink™ is compatible to be used with WetSuit® 2 Part, WetSuit® 1 Part, WetSuit® Trowel and WetSuit® Undercover to reinforce joints, cracks or seams.

Imagine easily winning more new projects because you’re able to take on more work in less time, profitably, without unnecessary training or labor costs.

We’ve been helping contractors grow their businesses using reliable roofing and waterproofing solutions for over 35 years. We’ve earned our experience on the inside of the construction and development and roofing and waterproofing industries.

Here's What Their Saying About WetSuit®

We are extremely happy with our experience in working with Poseidon Sales and Wetsuit. Nothing but positives. We had a very complicated project involving the recreation deck for a pedestrian walkway that was at level five involving approximately 8000 square feet. An expansion joint was required that necessitated elongation and flexion and Wetsuit was the only product that could meet the demand requirements. Not only did it meet the project requirements but also an aggregate was used which allowed it to be used as a walking surface and still maintained the 20 year warranty. It provides just amount of give as a walking surface and yet looks like stucco. We even used it on our planter walls to water proof those while maintaining the desired look. We are very happy with the work. They truly went above and beyond.

Brad Bowman, Architect - Finfrock , Winter Park, FL

I have had the opportunity to work with the Poseidon Sales and the Wetsuit product. It is truly impressive. The first thing that stood out was just how fast it could be applied. Other water proofing systems typically take up to 4 weeks to complete a 20,000 square foot surface. With Wetsuit, using only a 3 man crew, the same job can be completed in as little as 3 days. And whereas ponding water usually results in surface failure with other products, the Wetsuit product had no such issues. In addition, Wetsuit has a 2000% elongation. With other systems, once it cracks, it breaks open the membrane and has to be repaired. Not so with Wetsuit. Add the 20 year warranty on labor and materials and Poseidon’s excellent support and you have an unbeatable combination.

Jorge Cabada, GC Construction , N. Miami Beach, FL

We understand how delays, quality issues, unforeseen problems and cost over-runs affect waterproofing and roofing contractors. That’s why we’re the exclusive distributor and representative for Neptune Coatings Corporation.

Neptune Coatings Corporation manufacturers roofing, waterproofing, containment barrier, protective coating products, and installation equipment. We distribute exclusively in 26 states east of the Mississippi River, the Caribbean Islands and Bermuda.

Watch The Video Below To See Live Demonstrations of The WetSuit® System

Watch The Video Below To See The WetSuit® System Featured on Fox Business News

Cold-Fluid, Spray Applied, Seamless Membrane

Your jobs will never fall victim to premature failing of seams like conventional solutions. Every detail penetration, joint and edge is protected and catalyzed with a seamless waterproof membrane.

Put WetSuit® To Work In Your Business So You Can Start Benefiting From:

Avoid Downtime From Weather Conditions

You'll be able to work right up to the second when weather turns rainy because the WetSuit® system can be applied as instant set and curing 80% in just 3 seconds.

A Reliable, Profitable Revenue Stream

The WetSuit® System applies in half the time without expensive manpower. And it fully adheres to any substrate material and is self-flashing, saving you even more on labor cost. Combined with reduced warranty costs, there’s no easier or quicker way to grow your business and increase your bottom line profits.

Eliminate Warranty Costs and Call Backs

When the job is done… it’s really done! WetSuit® is fully guaranteed for 20 years. This means when you finish a job you can feel confident that you’ve just effectively eliminated warranty costs.

Reduced Labor Costs

No highly skilled manpower or extensive training is required. It only takes 3 workers to apply WetSuit® over 12,000 sq ft per day. You only need one worker to oversee the materials on the ground. A 2nd worker to handle the hoses and a 3rd worker to apply the material with a hand-held sprayer.

You don’t have to put your jobs at risk by using roofing and waterproofing systems with seams that will fail (likely prematurely). You can eliminate your risk to construction liability and warranty costs when you use WetSuit®

Where ever WetSuit® is used you’ll never have to worry about any leaks for at least 20 years. And, there will be no need for yearly or other inspections to keep the warranty in effect.

WetSuit® has endured rigorous, accelerated testing, proving it has zero degradation from ultraviolet light over a 35 year span. All other roofing material has been tested for only a 14 year span and is shown to have a degradation of 20% - 60%.

WetSuit® also has an elongation ability of over 2000%, a class A fire rating and is self-extinguishing. You can apply WetSuit® safely around occupied buildings, and public buildings like nursing homes and shopping centers because it’s water-based, non-toxic and has no VOC’s.

In fact, WetSuit® has no chemicals that are harmful to life. It’s even been approved for pond liners and liners in potable water vessels. You’ll never find a more effective roofing and waterproofing solution that can provide the results and the profit potential of WetSuit® Seamless Membrane System.

If you’re tired of dealing with conventional roofing and waterproofing with high labor costs and warranty related call backs, then you should Get A FREE Consultation now by picking up the phone and calling the number below…

 407-512-8479

Frequently Asked Questions

Do you offer sales and marketing support?

Do you have any training materials?

How many workers do I need for each project?

How many sq ft can I cover per day?

Do you deliver the materials on-site?

Is WetSuit® guaranteed against cracks, peeling and leaks?

Can I see a demonstration of how WetSuit® works?

Do you offer free consultations?

Is it fire resistant?

Is it protected from UV light?

How weather resistant is it?

Is it safe to have on public buildings?

Is it environmentally friendly?

Call Now To Learn More About Profitable Roofing and Waterproofing:

  • Easy-To-Use, Quick, Applies In Half The Time
  • Eliminate Delays and Cost Over-Runs
  • Keep Every Project On Schedule
  • arrow-right
    Reliable Way To Increase Profitability
  • Enables You To Take on More Projects In Less Time
  • No Highly Skilled Manpower Necessary
  • No Extensive Training Needed
  • arrow-right
    Reduce Warranty Costs and Call Backs on Work

If you’re tired of dealing with conventional roofing and waterproofing with high labor costs and warranty related call backs, then you should Get A FREE Consultation now by picking up the phone and calling the number below…

 407-512-8479

© Copyright Poseidon Sales, LLC | 3471 High Ridge Rd, Boynton Beach, FL 33426 | 407-512-8479 | Privacy Policy | Terms of Use